USB FLASH DRIVE CANNOT READ FILES/MOVIES ON TV AFTER USING IT AS BOOTABLE

Well, as the title says, it might be frustrating for some even you already formatted your USB drive over and over again but still can't read files thru your tv, but not after all after reading this article, although Google has an answer for it but doesn't elaborate on how to do it, the noobs style, here is a simple yet EFFECTIVE WAY to use your usb flash again in watching movies thru it.  The culprit in this problem was the GPT (Gui Partition Table) since most of the new PC today required a GPT instead of MBR (Master Boot Record) in formatting a Wimdows.

Things needed:

• RUFUS (portable version so no need to install)
• PC
• your USB flash drive

Here we go:

• Insert your USB flash drive into any usb port of your PC 
• Back up all the necessary files in your USB flash, because we will be wiping out all your files by formatting it
• Open RUFUS and follow these steps,

                     >  Select MBR partition scheme for UEFI

                     >  Select NTFS

                     >  Uncheck bootable disk using..

                     >  Uncheck create extended label and icon files

                     >  Lastly click Start and wait, you do the math.

How To Combine/Connect Two or More ISP Into Single Internet Connection

Noobs Definitions of Terms:
ISP = Internet Service Provider (Example: Smart, Globe, PLDT, etc..)

Things Needed:
>  Two Internet Provider (example Globe + Smart, or Globe + Globe, or Smart + Smart, you get the math)
>  Connectify Installer (download from here)
>  PC/Laptop
>  Wireless dongle and or another LAN card for desktop
>  Common Sense

Instructions:
>  Disconnect from Internet first
>  Install the latest version of Connectify (but in this tutorial I prefer the old version 7.3.0.30245 Pro since it's more stable than the latest version and the good thing with it, we can crack it into PRO)
>  Finish the entire installation
>  Now launch Connectify Activator
>  Click Activate PRO button
>  Activator will show a message box saying Connectify successfully activated
>  Wait 1 minute and Launch Connectify

That’s it you are ready to go with Connectify PRO ! Launch Dispatch and make sure its PRO too


NOTES:
For LAN + LAN

Mostly dito nagkaka roon ng problema when using Connectify Dispatch, IP address of each modem should have a different IP to be able to synchronize the two internet connection into single connection. Example, if the first modem has an IP or 192.168.254.254 the second modem should not have the same..so you need to change the modems IP, In short dapat walang magkaparehong IP ang modem, example ulit, if the first modem has an IP of 192.168.1.1 the second modem should be 192.168.2.1 para hindi IP conflict.

For LAN + Wifi
No need to change wifi modems IP if conflict with the first modem that is connected via LAN port.


Here's my setup Smart @ 2mbps combining with Globe @ 2mbps (LAN+LAN)

NETEQUITTE 101

HOW TO INSTALL Sing! Karaoke by Smule IN ANDROID

1.  On your phone, open google play store (if you still don't have it google and install, should have an account on gmail for future use).

2.  Search "smule" on Google Play search box.

3. Install and follow the prompt

Done..

Alcatel One Touch Flash 2 Low Volume Problem Solution

Alcatel One Touch Volcanic Grey 7049D Sound Problem



     Recently I purchased this phone at Lazada, everything was perfect till I found out about its very weak volume that i used to loudspeaker the phone every time I'm using the call function. Upon a minute of googling, I found the way to increase the volume of this incredible phone by accessing the engineering mode. Here we go;

1. On your dialpad, dial *#*#3646633#*#*

 

2. Slide your finger left twice and enter into Audio option.



There are several options but I only adjust these three options:

 

• Normal mode (adjusts the music volume from the speaker) 
• Headset mode (for headset volume for Music, FmRadio etc.) 
• Loudspeaker mode (FmRadio, Incoming call volume, Loudspeaker on call etc.)

 

3.   The default Volume is 112 and the default Max Volume is 128, Now increase the Value of Volume and Max Volume depends on your need.

Note:  Do not increase at the maximum, to prevent speaker damage.  Also back up data...before calibrating.  Tried and tested but still do at your own risk.

HOW TO MODIFY WIFI NAME AND PASSWORD OF GLOBE LTE MODEM (B315s-936)

1,  Open your browser (ex. google chrome, internet explorer, firefox, etc.)
2.  Type 192.168.254.254 on address bar of your browser.
3.  Click Login

                    username: user
                    password:  @l03e1t3

                     password in words: at sign, small letter L, zero, three, small letter E, one, small letter T, three

4.  Click SETTINGS
5.  Click WLAN
6.  Click WLAN Basic Settings

•   Hover and click your mouse to SSID to change your wifi name.
•   Hover and click your mouse to WPA pre-shared key to change your wifi password, password must be at least 8 characters.

                     NOTE: Before changing the password tick the box show password first, Why? common sense.

7.  Lastly, Click APPLY
                   


                     Tips:  Just in case the following instructions above doesn't work for you and you can no longer access your wifi, simply use the LAN cable included in the modem's box in order to access the settings of your modem, and restart the whole steps above,

Another thing, worst case scenario, you cannot access your modem thru wifi and even thru LAN (wired cable).  Simply long press the reset button at the back of your modem using paper clip or any similar thing for about 10 seconds until the modem restarts or off.  Resetting the modem will make all the settings restored to its default.

Contact us:
ruidelvar@yahoo.com.ph
M2ACAT

Easiest Way To Clear Your Cache

How To Clear Windows 7 Cache

Copy and paste one of the following lines depending on your version to the run windows

(Clickstart , paste the line)

For 32-bit:

%windir%\system32\rundll32.exe advapi32.dll,ProcessIdleTasks

For 64bit:

%windir%\SysWOW64\rundll32.exe advapi32.dll,ProcessIdleTasks