Alcatel One Touch Flash 2 Low Volume Problem Solution

Alcatel One Touch Volcanic Grey 7049D Sound Problem



     Recently I purchased this phone at Lazada, everything was perfect till I found out about its very weak volume that i used to loudspeaker the phone every time I'm using the call function. Upon a minute of googling, I found the way to increase the volume of this incredible phone by accessing the engineering mode. Here we go;

1. On your dialpad, dial *#*#3646633#*#*

 

2. Slide your finger left twice and enter into Audio option.



There are several options but I only adjust these three options:

 

• Normal mode (adjusts the music volume from the speaker) 
• Headset mode (for headset volume for Music, FmRadio etc.) 
• Loudspeaker mode (FmRadio, Incoming call volume, Loudspeaker on call etc.)

 

3.   The default Volume is 112 and the default Max Volume is 128, Now increase the Value of Volume and Max Volume depends on your need.

Note:  Do not increase at the maximum, to prevent speaker damage.  Also back up data...before calibrating.  Tried and tested but still do at your own risk.

HOW TO MODIFY WIFI NAME AND PASSWORD OF GLOBE LTE MODEM (B315s-936)

1,  Open your browser (ex. google chrome, internet explorer, firefox, etc.)
2.  Type 192.168.254.254 on address bar of your browser.
3.  Click Login

                    username: user
                    password:  @l03e1t3

                     password in words: at sign, small letter L, zero, three, small letter E, one, small letter T, three

4.  Click SETTINGS
5.  Click WLAN
6.  Click WLAN Basic Settings

•   Hover and click your mouse to SSID to change your wifi name.
•   Hover and click your mouse to WPA pre-shared key to change your wifi password, password must be at least 8 characters.

                     NOTE: Before changing the password tick the box show password first, Why? common sense.

7.  Lastly, Click APPLY
                   


                     Tips:  Just in case the following instructions above doesn't work for you and you can no longer access your wifi, simply use the LAN cable included in the modem's box in order to access the settings of your modem, and restart the whole steps above,

Another thing, worst case scenario, you cannot access your modem thru wifi and even thru LAN (wired cable).  Simply long press the reset button at the back of your modem using paper clip or any similar thing for about 10 seconds until the modem restarts or off.  Resetting the modem will make all the settings restored to its default.

Contact us:
ruidelvar@yahoo.com.ph
M2ACAT